BMW K1600GTL, Rider'S Manual

Page: 142 / 205

Push two mounting pins 2
far enough apart that front
suspension fits between them.
Use locating pins
3 to set front
wheel stand to desired height.
Center front wheel stand rela-
tive to front wheel and push it
against front axle.
ATTENTION
The left mounting pin moves
too much.
Damage to the sensor ring
of the ABS integrated in the
BMW Motorrad.
Only push the left mounting
pin so far inward that it does
not touch the sensor ring.
Push two mounting pins
2
through triangles of brake
caliper support toward inside
so that front wheel can still be
rolled through.
Tighten locating screws
1 .
ATTENTION
Lifting off of the main stand
if the motorcycle is raised
too high.
Component damage caused by
tipping over.
When raising the motorcy-
cle, make sure that the center
stand remains on the ground.
Apply uniform pressure to push
front wheel stand down and
raise motorcycle.
Jump-starting
CAUTION
Touching live parts of the ig-
nition system when the en-
gine is running.
Electrocution
Do not touch parts of the igni-
tion system when the engine is
running.
ATTENTION
Current too high when jump-
starting the motorcycle
8
140
z Maintenance