BMW K1600GTL, Rider'S Manual

Page: 81 / 205

You can now proceed to log on
all the remote controls.
Step through the following pro-
cedure with each remote con-
trol in turn:
Press and hold down buttons 1
and 2 until LED 3 stops flash-
ing.
LED
3 flashes for about ten
seconds.
Release buttons
1 and 2 .
LED 3 is illuminated.
Press button 1 or button 2 .
One acoustic signal sounds,
LED
3 goes out.
To complete logon:
Switch off ignition.
Three acoustic signals sound.
Logon is also ended when
four remote controls have been
logged on.
if you have logged on the first
remote control and then do not
press a button within approxi-
mately 30 seconds.
Synchronizing the
remote-control units
with central locking system OE
with anti-theft alarm system
(DWA)
OE
without Keyless Ride
OE
If the central locking system
stops responding to the sig-
nals from a remote control unit
then the unit will need to be
resynchronized. This scenario
can arise (for example) after the
remote-control unit's buttons
have been pressed frequently
while the unit was beyond the
range of the alarm system.
The procedure for synchroniz-
ing the remote controls is as
follows:
Switch on the ignition.
Press and hold down buttons 1
and 2 until LED 3 stops flash-
ing.
LED
3 flashes for about ten
seconds.
Release buttons
1 and 2 .
LED 3 is illuminated.
Press button 1 or button 2 .
LED 3 goes out.
4
79
z Operation