BMW K1600GTL Rider'S Manual Download Page 194

Page: 194 / 205

Certifications

BMW Keyless Ride ID Device

USA, Canada

Product name: BMW Keyless Ride ID Device

FCC ID: YGOHUF5750

IC: 4008C-HUF5750

Canada:

Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

USA:

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may cause

undesired operation.

Any changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

Summary of Contents for K1600GTL














































































































































































































Search results

Summary of Contents for K1600GTL

Reviews:

Related manuals for K1600GTL

Brands by name

Popular brands

BMW K1600GTL, Rider'S Manual

Search results

Summary of Contents for K1600GTL

Reviews:

Related manuals for K1600GTL

Brands by name

Popular brands