BMW K1600GTL Rider'S Manual Download

Page: 124 / 205

Work the cable into position at
positions

Close plug connection

Connect plug

of the seat

heating.

Position the seat with
mounts

in rubber buffers

on left and right.
Lower the rear of the seat and
engage the seat in the latching
mechanism.

Maximum payload and
maximum speed

Observe maximum payload and
maximum speed as indicated on
label in the topcase.
If you cannot find your combi-
nation of vehicle and topcase
on the label, contact your BMW
Motorrad Retailer.

The following values apply to the
combination described here:

Maximum speed limit for
driving with a Topcase

max 112 mph (max 180 km/h)

Payload of Topcase

max 22 lbs (max 10 kg)

122

Accessories

Summary of Contents for K1600GTL














































































































































































































Search results

Summary of Contents for K1600GTL

Reviews:

Related manuals for K1600GTL

Brands by name

Popular brands

BMW K1600GTL, Rider'S Manual

Search results

Summary of Contents for K1600GTL

Reviews:

Related manuals for K1600GTL

Brands by name

Popular brands