BMW K1600GTL Rider'S Manual Download Page 73

Page: 73 / 205

Storage compartments

Use the stowage
compartments

Use the ignition key to open or
close lock

of the left stowage

compartment or lock

of the

right stowage compartment.
To open the lid, push the un-
locked lock barrel down.

ATTENTION

High temperatures in the
storage compartments, par-
ticularly in summer.

Damage to objects housed here,
particularly electronic devices
such as cell phones and MP3
players.

Refer to the operating
instructions of the electronic
device for possible usage
restrictions.
In summer, do not place
heat-sensitive objects in the
stowage compartments.

Clutch

Adjusting clutch lever

WARNING

Modified position of the
clutch-fluid reservoir.

Air in the clutch system.

Do not turn the handlebar fit-
ting on the handlebar.

WARNING

Adjusting the clutch lever
while driving.

Accident hazard

Only adjust the clutch lever
when the motorcycle is
stationary.

Turn adjusting screw

clock-

wise to increase distance be-
tween clutch lever and handle-
bar grip.
Turn adjusting screw

coun-

terclockwise to decrease dis-
tance between clutch lever and
handlebar grip.

Operation

Summary of Contents for K1600GTL














































































































































































































Search results

Summary of Contents for K1600GTL

Reviews:

Related manuals for K1600GTL

Brands by name

Popular brands

BMW K1600GTL, Rider'S Manual

Search results

Summary of Contents for K1600GTL

Reviews:

Related manuals for K1600GTL

Brands by name

Popular brands