BMW 318D, Owner'S Handbook Manual

Page: 150 / 430

Via iDrive:
1. "CAR"
2. "Settings"
3. "Exterior lighting"
4. "One-touch turn signal"
5. Select the desired setting.
The setting is saved for the current driver profile.
Indicating a turn briefly
Press the lever as far as the resistance point and
hold it there for as long as you wish to indicate a
turn.
High-beam headlights,
headlight flasher
Push the lever forwards or pull it back.
▷ High-beam headlights on, arrow 1.
The high-beam headlights are illuminated
when the low-beam headlights are switched
on.
▷ High-beam headlights off/headlight flasher,
arrow 2.
Wiper system
General
Do not use the wipers on a dry windscreen, oth‐
erwise the wiper blades will wear or become
damaged more quickly.
Safety notes
WARNING
If the wipers start moving when they are folded
away from the windscreen, parts of the body
may become trapped or the vehicle may be
damaged. There is a danger of injury or dam‐
age to property. Make sure that the vehicle is
switched off when the wipers are folded away
from the windscreen, and that the wipers are in
contact with the windscreen when switching
on.
NOTE
If the wipers are frozen to the windscreen,
switching them on may cause the wiper blades
to tear off and the wiper motor to overheat.
There is a risk of material damage. Defrost the
windscreen before switching on the wipers.
Switching on
Press the lever upwards to the desired position.
▷ Rest position of the wipers, position 0.
▷ Rain sensor, position 1.
▷ Normal wiper speed, position 2.
When the vehicle is at a standstill, the wipers
switch to intermittent operation.
▷ Fast wiper speed, position 3.
When the vehicle is at a standstill, the wipers
switch to normal speed.
Seite 150
CONTROLS
Driving
150
Online Edition for Part no. xxx - VI/19