BMW Motorrad F 750 GS 2021, Rider'S Manual

Page: 202 / 314

196 MAINTENANCE
disengage chain 9 from the
sprocket.
Roll the rear wheel to the rear
and clear of the swinging arm
and at the same time pull
brake-caliper carrier 10 back
far enough to allow the rear
wheel to clear it.
The sprocket and the
spacer bushes on left and
right are loose fits in the wheel.
Make sure that these parts are
not damaged or get lost on re-
moval.
Installing rear wheel
WARNING
Use of a non-standard wheel
Malfunctions in operation of
ABS and DTC
See the information on the
effect of wheel size on the
ABS and DTC systems at
the start of this chapter.
ATTENTION
Tightening threaded fasten-
ers to incorrect tightening
torque
Damage, or threaded fasten-
ers work loose
Always have the security
of the fasteners checked
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Roll the rear wheel on the
support into the swinging arm
as far as necessary to permit
the brake-caliper carrier to be
inserted.
Insert the brake-caliper car-
rier 1 into guide 2 .