BMW Motorrad F 750 GS 2021 Rider'S Manual Download Page 195

Page: 195 / 314

189

Force brake pads

slightly

apart by rocking brake cal-

iper

back and forth against

brake disc

ATTENTION

Use of hard or sharp-edged

objects in proximity to com-

ponent

Component damage

Take care not to scratch

components; cover or mask

as necessary.

Mask off the parts of the

wheel rim that could be

scratched in the process of

removing the brake calipers.

ATTENTION

Unwanted inward movement

of the brake pads

Component damage on at-

tempt to install the brake cal-

iper or because brake pads

have to be forced apart

Do not operate the brakes

with a brake caliper not cor-

rectly secured.

Carefully pull the brake cal-

ipers back and out until clear

of the brake discs.
Place the motorcycle on a

suitable auxiliary stand.

Install the rear-wheel stand

(

176).

with centre stand

Make sure the ground is level

and firm and place the motor-

cycle on its centre stand.
Raise front of motorcycle un-

til the front wheel can turn

freely. BMW Motorrad recom-

mends the BMW Motorrad

front-wheel stand for lifting

the motorcycle.

Install the front-wheel stand

(

175).

Summary of Contents for F 750 GS 2021



























































































































































































































































































































Search results

Summary of Contents for F 750 GS 2021

Reviews:

Brands by name

Popular brands

BMW Motorrad F 750 GS 2021, Rider'S Manual

Search results

Summary of Contents for F 750 GS 2021

Reviews:

Brands by name

Popular brands