15
All calibrations of the device can be calibrated for any materials and any scales,
and are divided in this way just for practicality.
Cells can have 3 states:
User calibration (1 or 2 point)
Calibration
Empty cell
Press the buttons
and
to choice cell for calibration, for example HRC
for Alloy Steel:
Press SELECT by
and EDIT, the table appears:
The device, making the measurement, gets the nominal codes, the purpose of
calibration - is to find the correlation between the nominal code and hardness
values (construction of the relation function).
To start the calibration, enter the real values of the samples. Press EDIT by
and select EDIT in the window:
Stainless Steel
Cast Iron
Alloy Steel
User 1
Steel
Current value
of the code
The resulting value of the
function (polynomial)
Number of
measurements
