11
.
Figure 1a. UCI Probe U1
1 – Probe’s body; 2 – Collapsible nozzle;
3 – Puck; 4 – Place for fingers
Figure 1b. Demounted nozzle
1 – Probe’s body; 2 – Nozzle main part;
3 – Puck; 4 – Protective tube;
5 – Diamond.
One side of the puck is flat to using probe on flat surfaces. Another side has
grooves for using a probe on cylindrical surfaces.
It is marked slots designed for ease of measurement of hardness on cylindrical
products of various diameters. Probe with demounted nozzle is usually using to
measure hardness in difficult places, such as narrow or deep groove.
The probe may be removed from the nozzle is used for measuring the hardness in
the narrow and hard to reach places.
Figure 2
Turn on the hardness tester pressing
, and select the
measurement mode by pressing
X
. Detailed description
of the modes, see paragraph 10.
Then select the scale and material hardness for which there is a proper calibration
(How to calibrate device see paragraph 11). For select the hardness scales press
H
and chose the scale that will be used by keys
and
, then press
Material
Scale
The state of the diamond indenter (ready for measurement)
