13
WARNING! Not allowed a sharp click and scratching sample by indenter, this
may lead to exceeding the allowable value of error and damage the diamond
indenter.
You can get the value of the current measurement or the average for the series of
measurements, depending on the settings in Measurement settings menu Current
or Average:
After the measurement, you can save measurement (series
of measurements) in the archive by pressing SAVE with
key
.
Move the cursor over the keyboard with keys
and
and selecting a symbol by pressing the
. Then select
SAVE by cursor. The record is stored in the archive.
10. Measurement modes
To selecting the measurement mode go to the Measurement and press
X
. The
device will offer you the following measurement modes:
- NORM – normal operation mode;
- STAT – statistics mode;
- SMART – mode of filter incorrect measurements;
- SYGNAL – the display signal mode (only for Leeb).
To select the measurement mode, press
X
.
10.1. Normal mode
In normal mode, the device
displays the current measurement
value or average of series of
measurements, depending on
selected the Current or Average in Measurement settings menu:
10.2. Statistics mode
Statistics mode allows to monitoring the following
parameters of measurement series:
- Maximum;
- Minimum;
- Deviation;
- Average;
- Number of measurements.
