10
Maintenance
10.3 Safety instructions for maintenance and servicing
140
NOTE
Only suitable and undamaged tools must be used for maintenance and
repair work.
The machine must be carefully cleaned before starting the work.
During maintenance and repair work, ensure a clean environment and
that no loose parts remain in the machine.
Only original spare parts or spare parts expressly approved by the
manufacturer must be used.
Modifications and welding work on pressure vessels are prohibited.
Incorrect or negligent disposal can cause considerable environmental
pollution.
−
Have specialized companies dispose of electrical scrap, electronics
components, lubricants, operating supplies and other auxiliary
materials.
−
Observe the handling and disposal regulations in the safety data
sheets of hazardous substances.
−
Disposal must take place in accordance with the applicable national
rules and regulations.
In case of doubt, consult the manufacturer or obtain information from local
authorities or specialist disposal companies regarding environmentally
friendly disposal.
Summary of Contents for alpha CR
