BMS alpha CR, Operating Instructions Manual

Page: 74 / 188

6 Driving operation
6.6 Notes for driving operation
74
6.6 Notes for driving operation
WARNING
Danger due to eccentric centre of gravity.
During driving operation the machine may tip over due to an eccentric
centre of gravity.
−
Empty and clean the mixing and delivery vessel before travelling.
−
If an optional feeder or scraper is fitted, empty and clean it before
travelling.
−
The towing vehicle must have the same on-board voltage as the
machine.
When driving, it is imperative that you observe the road traffic regulations
(StVO § 3, § 18 para. 5). Additionally, observe the national regulations of the
country in which the
BMS alpha
CR
is used.
When driving, the following points must be observed:
−
The trailer must not be tilted more than 25° in transverse direction
(danger of tipping over).
−
The trailer must not be tilted more than +/- 20 ° from the horizontal in
longitudinal direction (driving direction).
−
The machine is designed so that the carriage shaft load reaches
approx. 50 % of the permissible carriage shaft load. The minimum and
maximum permissible carriage shaft load must not be exceeded or
undercut. The carriage shaft load is at least 25 kg and at most 100 kg.
➢
Additional loading of an uncleaned hopper or feeder can change
the carriage shaft load and have a negative effect on the travel
behaviour.
−
When manoeuvring the machine, a second person must always be
called for help or must be available within easy reach.