Layout and function
4
Chassis
4.3
43
Feeder and scraper
Figure 13: Feeder and scraper
The feeder (1) allows new material to be fed into the feeder during the
automatic mixing and delivery operation. The feeder can be loaded in the
discharged state. This enables a more ergonomic working method. The
hydraulic tilting process takes over the filling into the mixing and delivery
vessel.
The operating person can prepare the next mix during the delivery process,
thus enabling continuous operation.
The scraper (2) can only be mounted in combination with a feeder (1). The
scraper considerably facilitates filling the feeder. The scraper shovel is
pulled through the sand pile by means of a steel cable and transports it into
the lowered feeder. Manual shovelling of sand or gravel is no longer
necessary.
The scraper is operated via radio remote control. The transmitter is mounted
on the shovel, the receiver in the motor compartment.
Summary of Contents for alpha CR
