7
Work mode
7.9
Stopping the working operation
114
Additionally for the option feeder with scraper
WARNING
Risk of injury from sharp-edged, pointed parts.
A damaged pull rope can cause serious injuries when being wound up.
−
Do not let the pull rope run through your hand when winding it up.
−
Wear protective gloves.
−
Check the pull rope for damage each time it is wound up, especially for
any torn steel fibres. Damaged pull ropes must be replaced
immediately.
WARNING
Risk of injury from moving components.
Movable parts can cause severest injuries during operation.
−
Do not stay within the swivel range of the feeder or its vicinity.
−
Do not decommission safety devices.
−
Wear the stipulated personal protective equipment.
Figure 58: Installing the scraper
1.
Release the pull rope (1) from the scraper shovel.
2.
Roll up the pull rope by pressing and holding down the thumb button (2)
on the radio transmitter.
3.
Wash the outside and inside of the feeder with water and a hand brush
if necessary.
4.
Preserve the feeder with a biodegradable
BMS
machine care product.
1.
Clean the outside and inside of the scraper shovel with water and a
hand brush if necessary.
2.
Preserve the scraper shovel with a biodegradable
BMS
machine care
product.
Summary of Contents for alpha CR
