![background image](http://html.mh-extra.com/html/bmpro/drifter/drifter_owners-manual_2779845015.webp)
15
16
Figure 1: Mounting Bracket Details
80 mm
42
mm
47 mm
5.2 mm
1.8 mm
MAX
Screw head clearance
for mounting screws
Figure 2: Fitting Drifter onto mounting bracket
Locate the Drifter over the four
bracket tangs, then push down
until dimple 'A' locks in hole 'B'.
A
B
Figure 3: Removing Drifter from mounting bracket
Insert flat-blade screwdriver into slot 'A'.
Gently lever case away from bracket
enough for dimples 'B' to clear locating
holes Then slide Drifter upwards.
Note: Some force may be needed to slide
the Drifter upwards because it usually
binds tightly on the four locating tangs.
B
A
B
Figure 2: Fitting Drifter onto mounting bracket
16
Figure 1: Mounting Bracket Details
80 mm
42
mm
47 mm
5.2 mm
1.8 mm
MAX
Screw head clearance
for mounting screws
Figure 2: Fitting Drifter onto mounting bracket
Locate the Drifter over the four
bracket tangs, then push down
until dimple 'A' locks in hole 'B'.
A
B
Figure 3: Removing Drifter from mounting bracket
Insert flat-blade screwdriver into slot 'A'.
Gently lever case away from bracket
enough for dimples 'B' to clear locating
holes Then slide Drifter upwards.
Note: Some force may be needed to slide
the Drifter upwards because it usually
binds tightly on the four locating tangs.
B
A
B
Figure 3: Removing Drifter from mounting bracket