9
Back-light Functionality
Turn on back-light temporarily:
Press either the Home or Back-light button.
The back-light will automatically turn off after 30 seconds.
Turn on back-light Permanently:
With the back-light off, press and hold the Back-light button until the back-light blinks
(approximately three seconds).
Turn off back-light:
Press the Back-light button. This cancels both temporary and permanent back-light display.
Water Pump Switch
This switch controls power to the water pump.
In the up position the pump is off and the display shows “WATER PUMP OFF”
In the down position the pump is powered and the display does not show any water pump
annunciator.
USB CHARGER
A standard USB-style charger is integrated into the DRIFTER. Charge current is limited to 0.9A.
CLOCK SETTING
1. Ensure the display is in normal mode (not in any setting mode).
2. Press and hold the
Home
button for at least 5 seconds. The minute digits will start
flashing, the “TIME” annunciator will be displayed, and all other non-relevant display
segments are turned off.
3. Pressing the
Home
button will now toggle between setting the hour digits and minute
digits.
4. To increment the flashing digits, press the
Back-light
button.
5. To exit the Clock Setting mode, do not press any button for at least 15 seconds. When
the display returns to its normal appearance, it means setup mode has been exited.
14
4
12
