![background image](http://html.mh-extra.com/html/bmpro/drifter/drifter_owners-manual_2779845010.webp)
10
ADVANCED CONFIGURATION
These parameters are factory set.
Unless you are changing batteries or changing the number of water tanks, there is no
need to enter this mode.
ENABLING PARAMETER SETUP MODE
1. Ensure the display is in normal mode (not in any setting mode)
2. Press and hold the
Home
and
Back-light
buttons for at least 5 seconds.
When Parameter Setup Mode is entered:
› The “SETUP” annunciator is on (near the AM/PM indicators)
› The temperature digits show the parameter number
› The clock digits show the parameter value
› All other LCD segments are off.
3. Pressing the
Home
button displays the next parameter and its value. If the last parameter
is displayed, pressing the
Home
button displays the first parameter. The available
parameters are shown in Table 1: Setup Parameters.
4. To increment the parameter value, press the
Back-light
button.
› Incrementing past the maximum value causes the lowest value to be selected.
› For some parameters holding pressed the
Back-Light
button will force a fast or slow
increment of it’s value.
5. To exit the Parameter Setting mode, do not press any button for at least 15 seconds.
When the display returns to its normal appearance, it means setup mode has been exited.