
5
BA-100/1EN M52.XXXX
• Please keep a copy of the operating instructions.
• Completely read the operating instructions and the safety information before operating the assembly machine.
• We recommend that you use the orientation diagram for easier identification of the parts being described.
• Individual sections are indicated by capital letters which makes it easier to navigate the instructions.
C.1 - How to use these operating instructions
C - Guidelines on using this manual
(3.1)
Component description codes correspond to the section where the component and its function is described. For example,
(3.1)
is
described in section 3.
Comment:
This exclamation point indicates an important comment. If this comment is not followed, then assembly machine
components as well as the work piece itself may be damaged or the assembly machine may be rendered
inoperable and/or the work piece unusable.
Safety information:
This exclamation point indicates important safety information that must be followed.
Dear valued Blum customer,
We would like to congratulate you on your decision to purchase the Blum assembly machine. You are now the owner of a modern,
high-quality assembly machine that will give you years of productive use with the proper care and maintenance.
We realise that your time is valuable. However, you should carefully read these operating instructions before you set up and use the
machine for the first time. In this way, you will best determine how to adjust the assembly machine to your needs as well as protect
yourself against injury. In addition, the operating instructions also contain important information about machine maintenance.
At the time of printing, these operating instructions contained up-to-date information for this model. Small deviations due to continual
development of the assembly machine design cannot be ruled out entirely. These operating instructions are an important component
to the assembly machine and must be transferred to the new owner if the machine is sold.
For your own safety, you should only use Blum-approved replacement parts and accessories. Blum is not liable for any damages
resulting from the use of unapproved products.
Blum GmbH retains the right to make changes to and/or cancel without replacement the technical design, equipment,
technical information, colour, materials, services provided and similar without prior notice and without explanation as well
as the right to discontinue production of a specific model also without prior notice.
!
Summary of Contents for MINIPRESS M
