BLUM MINIPRESS M, Manual, Page: 3 / 28

3 BA-100/1EN M52.XXXX
B - Table of contents
A - Orientation diagram 2
B - Table of contents 3
B - Table of contents 4
C - Guidelines on using this manual 5
C.1 - How to use these operating instructions 5
D - Safety information 6
D.1- Remaining risks according to ISO EN 12100-2 6
D.2 - Safety decals 6
D.3 - Intended use 6
D.4 - Safety information 6
D.5 - Noise emission 7
D.6 - Dust emission 7
F- EC Declaration of Conformity / Techn. Data 9
F.1- EC Declaration of Conformity 9
F.2 - Technical data 9
1 - Assembly machine setup 10
1.1 - Unpacking and assembly 10
1.1.1) Assembly machine space requirement 10
1.1.2) Unpacking assembly machine and attaching to a suitable table 10
1.1.3) Positioning base ruler 10
1.1.4) Attaching swivel stops (optional) 10
1.1.5) Attaching work table 11
1.3 - Electrical connection 11
1.3.1) Electrical connection 11
1.4 - Dust extraction 11
1.4.1) Connecting extraction system to the assembly machine 11
2 - Assembly 12
2.1 - Furniture hinge assembly 12
2.1.1) Required parts 12
2.1.2) Setting drill bit length 12
2.1.3) Setting drilling pattern 12
2.1.4) Inserting drill bits 12
2.1.5) Setting drilling depth 12
2.1.6) Drilling depth stop 13
2.1.7) Setting the stop system 13
2.1.8) Setting swivel stops (optional) 14
2.1.9) Placing door on the work table and pushing up against the stop 14
2.1.10) Attaching insertion ram to swing arm 14
2.1.11) Clipping furniture hinge on to the insertion ram 14
2.1.12) Drilling 15
2.1.13) Checking the tilt adjustment of the swing arm 15
2.1.14) Inserting the furniture hinge 15
3 - Assembly 16
3.1 - Cruciform mounting plate assembly 16
3.1.1) Required parts 16
3.1.2) Setting drill bit length 16
3.1.3) Setting drilling pattern 16
3.1.4) Installing drill bits into the chuck 16
3.1.5) Checking drilling depth setting 16
3.1.6) Setting the stop system 16
3.1.7) Placing carcase side on the work table and pushing up against the stop 16
3.1.8) Drilling 16
4 - Assembly 17
4.1 - Drilling hole groups 17
4.1.1) Required parts 17
4.1.2) Setting drill bit length 17
4.1.3) Setting drilling pattern 17
4.1.4) Inserting drill bits into the chuck 17
4.1.5) Checking drilling depth setting 17
4.1.6) Setting stop system 17
4.1.7) Setting the swivel stops 17
4.1.8) Drilling hole groups 17
4.1.9) Placing carcase side on the work table and pushing up against the stop 17
4.1.10) Drilling 17