BVC6100LM Instruction Manual v.01
- 6 -
2.
I
nstallation of Camera Control Tool “3SensorTool” and initial settings of the camera
2.1 Power the PC ON.
2.2 Create a new folder such as BVC6100LM.
2.3 Copy the exe file, ”3Sensor_Tool.exe” and the initial setting file, ”BVC6100.ini”
to the folder ”BVC6100LM”.
2.4 Power the camera ON and start up ”3Sensor_Tool.exe”.
※
The power is ON, and after the LED turns to “Green”, then start up the
3 Sensor Control Tool.
2.5 The following screen for Port and Baud rate settings will be displayed.
Select the com port which is set in the frame grabber board.
And set the baud rate. The default setting is 115200.
2.6 After setting, click ”OK”.
2.7 Then the following window will be opened. The default setting of the camera will be
loaded.
2.8 It is ready to capture the image. Start up the frame capture board and start to grab the
image.
Important: The camera control tool “3Sensor_Tool.exe” and its initial
setting file “BVC6100.ini” must save in the same folder such
as “BVC6100LM”.