When the modem has not acquired a GPS fix, the reporting behavior is different
depending on the protocol. if using NMEA, then the modem will report empty fixes.
If using TAIP, then the modem will not send any reports.
1a. Using the NMEA protocol
Read
Section 9: GPS Settings
for details on NMEA.
Figure 33
1.
Set the reporting timer
(in seconds). This timer is the interval at which the
modem will report its GPS position fix.
2.
Select the NMEA message
(s) to report
3. Click
Submit
1b. Using the TAIP protocol
Read
Section 9: GPS Settings
for details on TAIP.
Figure 34
1.
Enter the TAIP command
that will be used. The command shown in Figure 34
acquires and reports its position, time and velocity every 10 seconds.
2. Optionally, enter an identifier (“Vehicle ID”) to be reported alongside the fixes
3. Click
Submit
