BlueLine VORTEX 8000Q, Service And Operation Manual

Page: 93 / 100

SECTION 5
BLUE LINE VORTEX 8000Q 87
N-Series Regeneration Modes
Automatic Regeneration
ECM monitors sensor inputs and determines DPF regeneration is
necessary
The ECM commands the
green DPF lamp “ON”
Vehicle should be driven normally
Note: If idling at
a stop or in “Park” during this
regeneration mode, the engine RPM will increase and
the exhaust brake will activate.
This process occurs at 180 mile intervals or sooner
Emergency Regeneration
Running Option 1
Drive vehicle above 30mph
ECM monitors sensor input and determines if
regeneration is possible
The ECM commands the
green DPF lamp “ON”
Vehicle should be driven normally
Note: If idling at a stop or in “Park” during this regeneration mode, the engine RPM
will increase and the exhaust brake will activate.
Switched Option 2
Set the parking brake, engine running and
transmission in Park or Neutral Position
Press DPF switch
Green DPF lamp comes “ON”
Engine RPM increases and exhaust brake activation
for about 20 minutes
If this is interrupted must press DPF switch to restart the process