SECTION 1
BLUE
LINE THERMALWAVE
®
5M
5
SPECIFICATIONS
Engine Speed
2400 rpm (High speed dual wand)
1900
rpm
(Medium
speed
single
wand)
1500 rpm (Low speed upholstery)
900 rpm (Idle)
Water Pump RPM
1550 rpm
Vacuum Pump RPM
2660 rpm @ 525 cfm
Water Flow Rate
5 GPM (maximum)
Water Pump Pressure
1200 PSI (maximum)
Vacuum Relief Valve
13 in. HG
Waste Tank Capacity
115 Gallons at shutoff
Console
Weight
1060
lbs.
Console Weight (with waste tank
&
accessories) 1420
lbs.
(2220 lbs w/full waste tank)
TORQUE VALUES
Engine
Hub
720
inch/lbs.
60
ft/lbs.
Vacuum Pump Hub
192 inch/lbs. 16 ft/lbs.
JET SIZING
BLUELINE
recommends that the total floor tool tip size does not exceed .06”. Using
larger jet sizes on your
THERMALWAVE
®
unit may reduce cleaning temperatures.
Example:
Four-jet wand uses four 95015 jets. (95 deg. Spray angle w/015 orifice)
.015 x 4 = .06
When using two wands while cleaning with this unit, BLUELINE recommends that the
tip size in each tool does not exceed a total of .040”.
Example:
Four-jet wand uses four 9501 jets. (95 deg. Spray angle w/01 orifice)
.01 x 4 = .04 .04 x 2 tools = .08
Upholstery tool jet size: 80015
Stair tool jet size: 9502
