SECTION
3
BLUE
LINE THERMALWAVE
®
5M
20
ENSURE THERE IS ADEQUATE FUEL
Check the fuel tank to ensure there is adequate
fuel to complete the job and transport the
vehicle. This unit consumes approximately 1
to 1.20 US gallons of fuel per hour, depending
on the speed setting.
REMOVE TOOLS FROM THE
VEHICLE
Remove any tools, accessories or hoses from
the vehicle that you will require.
WATER SUPPLY CONNECTION
NOTE:
Prior to connecting your water inlet
hose to any supply faucet, flush out the faucet
until the water is free of any debris. Also,
flush out any debris from your water inlet
hose.
1. Connect the water supply hose to the water
inlet quick connector on the front of the unit.
Connect the hose to the faucet.
NOTE:
Never use a waste pump outlet hose
as a water inlet hose. Use only clean hoses for
water supply.
2. Turn the water supply faucet on. Water will
fill the water box.
HIGH PRESSURE HOSE
Before starting the unit, connect the high
pressure hoses to the solution outlet
connection(s) at the front of the unit. Connect
the cleaning tool(s) to the opposite end of the
pressure hose(s).
