Blue Seal E9311, Service Manual

Page: 33 / 50

-33-
Revision 4/F3544
Convection Oven © Moffat Ltd, April 2005
Centre Nut
Centre Nut
6.3.24 HOB INDICATOR LIGHT
6.3.23 HOB ENERGY REGULATORS
6.3.22 HOB ELEMENTS
1) Remove hob (refer 6.2.5) and hob base
panel (6.2.6).
2) Remove knob from top of hob control
panel by pulling firmly away from control
panel.
3) Unscrew centre nut.
Figure 6.3.31
4) Turn the hob over and withdraw the
energy regulator.
5) Transfer the wires to the new energy
regulator (refer electrical wiring diagram
8.2).
5) Reassemble in reverse order.
1) Remove hob (refer 6.2.5) and the hob
base panel (refer 6.2.6).
2) Remove wires from element, noting their
positions (refer electrical wiring diagram
8.2).
3) Unscrew centre nut and remove element
clamp.
1) Remove hob (refer 6.2.5) and hob base
panel (refer 6.2.6).
2) Remove wires from back of indicator.
3) From bottom, push indicator through top
of hob control panel, rotating clockwise.
4) Push new indicator in from top of panel
and reconnect wires.
Element
Clamp
Figure 6.3.30
4) Element can now be removed through top
of hob and replaced.
Figure 6.3.32
Indicator Wires
6.3.25 HOB CENTRE SECURING NUT
If the hob pressing is bowed excessively the
centre securing nut may have come away.
To repair:
1) Remove hob (refer 6.2.5) and the hob
base panel (refer 6.2.6).
2) Inspect stud and securing nut.
3) Repair as necessary.
Figure 6.3.33
Centre Securing Nut