Blue Seal E9311, Service Manual

Page: 29 / 50

-29-
Revision 4/F3544
Convection Oven © Moffat Ltd, April 2005
Two Screws
Two
Screws
Two Screws
6.3.10 HOLD THERMOSTAT
6.3.8 ROAST TIMER
1) Remove roast timer knob by pulling it
firmly away from control panel.
2) Open control panel (refer 6.2.1) and undo
two screws securing timer.
6.3.9 THERMOSTAT
1) Pull knob off front of thermostat
2) Open control panel (refer 6.2.1) and undo
two screws securing thermostat.
3) Transfer wires to new timer.
4) Withdraw old timer and insert new timer,
securing with screws.
5) Replace knob.
Two Screws
Figure 6.3.9
7) Insert new thermostat.
8) Re-assemble in reverse order.
3) Transfer wires to new thermostat.
4) Remove service panel (refer 6.2.2) and
from inside of oven loosen two screws
holding thermostat phial bracket.
Figure 6.3.10
Figure 6.3.11
Fibreglass Sleeve
Thermostat Phial
Figure 6.3.12
5) Withdraw old thermostat phial through
rear of oven.
6) Remove fibreglass sleeve from old
thermostat and fit it to replacement
thermostat.
1) Open control panel (refer 6.2.1) and undo
two screws securing hold thermostat
bracket.
2) Transfer wires to new thermostat.
3) Remove service panel (refer 6.2.2) and
from inside of oven loosen the thermostat
phial bracket.
Two
Screws
Figure 6.3.14
Figure 6.3.13