5
11. Close the tank lid immediately
after filling the tank. Make sure that it
is properly closed.
12. Never use the product without an
air filter.
EMERGENCY
Familiarize yourself with the use of
this product by means of this
instruction manual. Memorize the
safety directions and follow them
to the letter. This will help to
prevent risks and hazards.
1. Always be alert when using this
product, so that you can recognize
and handle risks early. Fast
intervention can prevent serious
injury and damage to property.
2. Stop the engine and unplug the
spark plug connector if there are
malfunctions. Have the garden
power tool checked by a qualified
professional and repaired, if
necessary, before you operate it
again.
3. In case of fire, stop the engine
and unplug the spark plug
connector. Take fire-extinguishing
measures immediately if the garden
power tool switch is no longer
accessible.
WARNING: Never use water to
extinguish a product on fire.
Burning fuel must be extinguished
with special extinguishing agents.
It is recommended that you keep a
suitable fire extinguisher within
reach in your work area.
RESIDUAL RISKS
Even if you are operating this
product in accordance with all the
safety requirements, potential
risks of injury, and damage remain.
The following dangers may arise
in connection with the structure
and design of this product:
1. Health defects resulting from
vibration emission if the product is
being used over long periods of time
or not adequately managed and
properly maintained.
2. Injuries and damage to properly
due to broken accessories or the
sudden impact of hidden objects
during use.
3. Danger of injury and property
damage caused by flying objects.
4. CAUTION: You may be burned if
you touch hot surfaces.
WARNING: This product
produces an electromagnetic field
during operation. This field may
under some circumstances
interfere with active or passive
medical implants. To reduce the
risk of serious or fatal injury, it is
recommended that persons with
medical implants to consult their
doctor and the medical implant
manufacturer before operating
this product.
ASSEMBLY
1. Remove all packing and shipping
materials.
2. Disconnect the spark plug
connector (2) from the spark plug.
WARNING: The product must be
fully assembled before operation.
Do not use a product that is only
partly assembled or assembled
with damaged parts.
AUXILIARY HANDLE
1. Remove the pre-assembled bolts
on the bracket of the auxiliary
handle (12).
Note: Pay attention to the bolts.
Keep them in a secure location.
2. Locate the handle (12) to the
upper side of the upper shaft (23)
and secure in place with the bolts
(Fig. 1).
3. Insert the handle grip (25) to the
end of the auxiliary handle (12) (Fig.
2).
4. Strain and fix the control cable (11)
with the cable ties (24) (Fig. 3).
FIG. 2
FIG. 3
FIG. 4
1-800-348-5004
FIG. 1
12
23
17
23
15
22
FIG. 5
16
23
22
A
17
FIG. 6
12
11
25
