4. Before using this product and after
any impact, check for signs of wear or
damage and repair as necessary.
5. Never operate this product with damaged
guards or without the guards in place.
6. Keep hands and feet away from the
cutting implement at all times, especially
when switching on the motor.
7. Never allow children or people unfamiliar
with the instructions to use this product.
8. Stop using this product while people,
especially children, or pets are nearby.
9. Only use the product in daylight or in
good artificial light.
10. Stop the engine before:
• Cleaning or when clearing a blockage
• Checking, carrying out maintenance,
or working on the product
• Adjusting the working position of the
cutting device
• Switching blades
• Leaving the product unattended
11. Ensure that the product is placed in
a proper working position before starting
the engine.
12. While operating this product, ensure
that the position is safe and secure.
13. Do not operate this product with a
damaged or excessively worn cutting
device.
14. To reduce fire hazards, keep the
engine and silencer free of debris,
leaves, and excessive lubricants.
15. Always ensure that all handles and
guards are fitted when using this product.
Never attempt to use an incomplete
product or one fitted with an unauthorized
modification.
16. Always use two hands to operate a
product fitted with two handles.
17. Always be aware of your surroundings
and stay alert for possible hazards of
which you may not be aware due to the
noise of the product.
18. Be careful when handling any cutting
device/sharp edge fitted for trimming the
filament line length. Ensure a new filament
trimming line is installed correctly before
turning the product on.
19. Always ensure that air vents are kept
clear of debris.
2. Never carelessly touch the product,
doing so may cause serious injury.
While the product is in operation
or shortly thereafter, its parts,
such as the exhaust pipe, engine,
and other surfaces are extremely
hot! Pay attention to the markings
on the product.
3. Make sure that the air intake of
the combustion engine is clear.
Keep the air intake free of dust,
dirt particles, gases, and fumes.
4. Make sure that air circulation is
adequate. The product must be
easily accessible from all sides.
5. Always switch the product off
and let it cool down, before refueling
it. Gas is highly flammable. Never
smoke when you are refueling the
product. Do not refuel the product,
if there is an open fire in the vicinity.
6. Always use suitable aids such
as funnels and filler necks. Do
not spill any fuel on the product or
its exhaust system. There is a
risk of ignition. However, if fuel
should be spilled, then you must
remove it carefully from all parts
of the product. Any residue which
may be present must be
completely removed, before the
product is operated.
7. Exhaust gases and fuel fumes
are noxious. Fuel fumes can ignite.
Never use the product in environments
where there is a risk of explosion.
8. Never breathe in any fuel fumes
when you are refueling the product.
Never fill the tank in enclosed spaces,
such as basements or sheds. There
is a risk of poisoning and explosion.
9. Avoid skin contact with the fuel.
10. Do not eat or drink while refueling
the product. If you have swallowed
gas or oil, or if the gas or oil has got
into your eyes, then seek medical
advice immediately.
LONGER TIME UNUSED MACHINE
RESTARTING
Unused machine be in storage for
longer than 90days, the ignition coil
be not damaged, it’s only carburetor
issue. Please follow these Instructions
to restart the machine.
1. Follow the maintenance and repair
instructions on this product. Never
carry out any modifications of the
product. Never change the preset
rotary speed or the engine and
product settings. Information about
maintenance and repair is provided
in this user manual.
1. Check either the fuel pipe aging or
cracking, if any, easy to buy new one
for replacement at local store
2. Check either the fuel pipe joint of
carburetor loosening or aging, if any,
cut the pipe joint a little bit to rejoin
as well
3. Please pull the starting rope 5-8 times
before fuel refilling to the carburetor is
in an operating state
4. Refilling the fuel and then restart the
machine according to the cold start mode
4
1-800-348-5004
FUEL HANDLING
MAINTENANCE & STORAGE
1. When the product is stopped for
servicing, inspection, or storage, shut
off power source, disconnect the spark
plug wire from the spark plug and make
sure all moving parts have come to a
stop. Allow the product to cool before
making any inspections, adjustments,
etc.
2. Store the product where the fuel
vapors will not reach any open flames
or sparks. Always allow the product to
cool down before storing.
3. When not in use, store the product
out of the reach of children.
4. Use only manufacturer’s
recommended replacement parts and
accessories.
5. When transporting or storing this
product, always fit the cutter transport
guard.
