SEND PBDRG
Send Pitchbend Range ON/OFF
This parameter has to be ON if your MIDI instrument stores
Pitch Bend Range in each preset separately. In this case the
AXON sends the Pitch Bend Range information after each
program change immediately again. This is necessary by most
KORG synthesizers, and probably by some other manufacturers.
If your MIDI instruments store Pitch Bend Range globally, just
like the AXON itself, this parameter should be OFF. If your are
not familiar with your MIDI instrument, you should set this
parameter to ON. Then your AXON will possibly give out some
unnecessary MIDI data but you will hardly notice it.
NOTE OFF L
Note off limit 10...30
This level sets the point on the decay envelope where the NOTE
OFF event will be sent. The higher the setting, the shorter the
note will be; the lower the setting, the longer the note will be
sustained.
LOCAL MODE
Local Mode : ON/OFF
OFF:
The MIDI data that are received by your AXON are directly
transferred to the embedded sound module. Programm change
commands do not influence your AXON. Naturally, you can
keep changing the presets of your AXON with the buttons.
Concerning the receive, your AXON is now like a GM-expander.
This function addresses especially to persons who work with a
sequencer: All MIDI data, the AXON generates during play, are
exclusively given out via MIDI OUT. The sequencer will send
data through its MIDI OUT. Please connect the MIDI OUT of
your sequencer to the MIDI IN of your AXON in order to direct
it to your embedded sound module. The AUDIO OUT signals
are transferred via the non-used pins of the MIDI THRU of your
AXON. For that purpose, use the special cable included with
your AXON.
ON:
If you don't use a sequencer, you should set this parameter to
ON. Your AXON controls now the embedded sound module and
programme change commands influence your AXON.
Additionally, the general MIDI sound name is shown while
editing the segment parameters. Of course, your AXON keep
sending data via MIDI OUT. Then, you can connect futher MIDI
instruments to the MIDI OUT. If you do not have an embedded
sound module, you should set LOCAL on ON in order to
benefit from preset changes via MIDI IN.
Summary of Contents for AXON NGC 77
