![background image](http://html1.mh-extra.com/html/blue-chip/axon-ngc-77/axon-ngc-77_user-manual_2775485026.webp)
REVERB
Reverb portion of a sound (MIDI controller 91) : OFF/I.. 128
If your MIDI instrument is fitted with an embedded Reverb, this
parameter allows you to decide about the Reverb portion of your
used sound. This parameter must set to OFF, if your MIDI
instrument does not have an installed Reverb. Your AXON won't
transfer this controller via MIDI. The Reverb portion of the
optional sound module will be controlled with this parameter,
too.
FINGR PICK
Finger picking : OFF/ON
This parameter switches on/ off several internal parameter,
which can be used for the finger picking technique at your
AXON. In this case, the pick split and the pick control function
aren't available any more. Please ensure that you hadn't used a
pick split in the current Scratch or Arrange preset. Also the pick
controller must be turned off (OFF).
VLCTY SENS
Velocity sensitivity (0...127)
You can restrict the dynamic response at your MIDI instrument
by reducing the value of this parameter. If the value is 0, all
played notes are given out of your AXON with the same velocity
value, independently of your dynamics. You get the greatest
dynamic response at the value of 127.
VLCTY OFFS
Velocity offset (-63...+63)
If the dynamics of your AXON is reduced by the Velocity
Sensitivity parameter, the generated velocity values could be too
high/ too low.. This parameter allows you to increase/ decrease
the velocity value again. (See illustration on the next page).
TRIGGER LEV
Trigger Level (0...9)
You assign by this parameter the weakest picking level that
causes a NOTE ON event to be sent. A low value means that a
weak picking triggers a tone; a high value means that a strong
picking is required.
Summary of Contents for AXON NGC 77
