![background image](http://html1.mh-extra.com/html/blue-chip/axon-ngc-77/axon-ngc-77_user-manual_2775485029.webp)
Chain Mode
Presets (I...64)
In live performance you will often want to change from one
scratch or arrange preset to another. You can do this very easily
by creating chains of presets in chain mode.You have the option
of creating up to 64 different chains with up to 32 scratch and/
or arrange presets (=steps) in each chain.
The chain presets or the single steps in a chain can be cycled
through by using the UP/DOWN keys on your guitar interface
whereas a footswitch can only move through the single steps of
a chain. It is plugged into the chain jack on the back panel of
yourAXON (clicking the footswitch once = forward moving;
double-click the footswitch = backward moving).
In order to create or change a chain you press the chain button
and use the +/- value keys. After hitting the OK button you can
start programming. You have four parameters to edit a chain
preset:
Step
(1...32)
Within a chain you set the step you want to edit. By using the +/-
keys you assign the step number which you would like to
change.
Please consider that the UP/ DOWN keys on your guitar
interface will not allow you to go past a LOOP point. In order to
do that use the +/- value buttons at your AXON.
Mode
(EDIT, INSERT, DELETE)
In most cases you will want to use the Edit mode whenever you
create a new chain or edit an existing one.
If you want to insert a step in the chain, select the number of the
step, at which point you want to insert a step. Selecting INSERT
and pressing OK will copy the present step to the very next step
and move all the following steps up by one number. You can
then edit the inserted step using EDIT.
Similarly, if you want to delete a step in the chain, set the
MODE: to DELETE and select the number of the step you want
to delete and press OK. The following steps in the chain will be
copied to their previous steps and their step numbers will be
reduced by one.
Please consider that you cannot leave here the submenu by
pressing the OK button since it is used to confirm the input. In
order to leave the submenu, change to another line by means of
the +/- parameter keys and press then the OK button.
Summary of Contents for AXON NGC 77
