PICK CTRL
Pick Controller (OFF, 0...127)
As mentioned above, your AXON has the unique possibility to
recognize the picking position. You can assign this picking
position to one of several MIDI controllers. Set the value for
example to 1 and you can simulate the modulation wheel of a
keyboard by the picking position. There are MIDI controllers
which are worth while. For that purpose, look at the user manual
of your MIDI instrument. Interesting controllers are for example
1 (mod wheel), 7 (volume) or 10 (panorama). By using the
following parameters you limit the picking position and
determine values which are appropriate for the used controller.
PI POSITION
Pick Position 1: 0...99
This parameter indicates the picking position from which the
pick value 1 changes continously its value to the pick value 2.
PI VALUE
Pick Value 1: MIDI controller value
As long as the picking position is below Pick position 1, this
value is triggered to the corresponding MIDI controller. If the
picking position is above pick position 1, the controller value
changes continously to the controller value which is determined
as Pick value 2.
P2 POSITION
Pick Position 2: 0...99
This parameter indicates the picking position to which the
controller value will continously change.
P2VALUE
Pick Value 2: MIDI controller value
As long as the picking position is below Pick position 2, this
value is triggered to the corresponding MIDI controller. If the
picking position is above pick position 2, the controller value
changes continously to the controller value which is determined
as Pick value 1.
Summary of Contents for AXON NGC 77
