BLU-JET AT6020, Assembly And Operators Manual

Page: 229 / 282

227
Task Procedures Illustrations
Task Procedures Illustrations
AT6020
A
E
B
1. Attach (A) (DP4496) 1/2” x
114” (9’6”) 10FJX-10FJX hose
to flow divider 90 degree
elbow. Extend through hose
holder to rod end of (DP4484) .
2. Install (B) (DP5001) 1/2” x
168” (14’) 10FJX-10FJX hose
to rear left-hand adapter on
the flow divider. Extend hose
through hose holders to butt
end of (DP4487) left-hand.
3. Attach (E) (DP5186) 1/2” x 132”
(11’) 10FJX-10FJX hose to rear
right-hand adapter on flow
divider. Extend hose through
hose holders to butt end of
(DP4487) right-hand.
3. Attach (E) (DP5186) 1/2” x 132”
(11’) 10FJX-10FJX hose to rod
end of primary wing gauge
wheel cylinder. Extend to butt
end of secondary gauge wheel
cylinder on each side.
NOTE:
Left-hand
and
right-hand
as viewed
from the
rear
Lift wheel
hoses
AT6020 60’ Hydraulic Hose Installation
Right-hand from the rear
Left-hand from the rear
Tractor Side
DP4485
3-3/4 x 12
DP4485
3-3/4 x 12
DP4484
3-1/2 x 12
DP4487
4-1/2 x 12
DP4487
4 -1/2 x 12
4. Install (D) (DP5184) 1/2” x
192” (16’) 10FJX-10FJX
hoses to rod ends of (DP4487) .
Extend hoses through hose
holders down each side to
butt ends of gauge wheel
cylinders (DP4486) .
DP4486
4 x 12
DP4486
4 x 12