BLU-JET AT6020 Assembly And Operators Manual Download Page 170

Page: 170 / 282

Task

Procedures

Illustrations

168

AT6020

4. Place

(g)

dual hubs assembly

into wheel leg weldment.

5. Insert

(i) (BM3640)

2” x 12-5/8”

pin with 21/32” hole into

wheel leg weldment.

6. Place (h) (BP 3599) 3” x 2” ID

10 GA. machinery bushings

over pin as it is inserted.

7. Remove lug nuts before

installing tires.

Dual Wheel Center Lift Assembly

Mounting

dual hub

and spindle

assembly

(g) AM6198

, Duals, rocker,

w/spindle loops for 2-3/4”

spindle and

AAM2800-1

assembly, hub spindle, 608

hub, 2-3/4” x 16” w/lock.

Apply anti-seize to spindle shaft.

• Turn set screws out.

1/4”

• Insert hub and spindle as

sembly. Allow 1/4” of space

between hub and spindle loop.

• Tighten set screws and

lock nuts.

• Pre-assembly dual rocker

before mounting.

Summary of Contents for AT6020



























































































































































































































































































Search results

Summary of Contents for AT6020

Reviews:

Related manuals for AT6020

Brands by name

Popular brands

BLU-JET AT6020, Assembly And Operators Manual

Search results

Summary of Contents for AT6020

Reviews:

Related manuals for AT6020

Brands by name

Popular brands