INSTALLATION (continued)
5
NOTE:
This equipment must
be installed to comply with all
applicable federal, state and
local plumbing codes and
ordinances.
NSF requires 4" legs for cleaning underneath unit. A flex line or
loops of copper tubing from water supply should be used if the
unit will be moved. See Figure 2 below.
The DRIP TRAY pan is equipped with a drain outlet.
Bloomfield recommends that this drain outlet be connected to
1/2" I.D. flexible tubing and routed to a building drain. If a drain
line is not used, the supplied plug on the pan drain fitting must
remain in place.
Fig. 2a Water Supply Installation - Cold Water
Fig. 3 Drain Line Connection
Fig. 2b Water Supply Installation - Hot Water
