SERVICING INSTRUCTIONS
12
PROCEDURE: Adjust Water Volume
PRECAUTIONS: Disconnect brewer from electric power.
Allow brewer to cool.
FREQUENCY: As required (water volume is too high or low,
or as required for coffee taste)
TOOLS: Flat Blade Screwdriver
#2 Phillips Screwdriver
1. Carefully remove product canisters. Place an appropriate
container in position under the dispense nozzles.
2. Carefully remove panel #33 to access water valves. Position
panel out of the way. Be careful not to damage fan or
connecting wires attached to panel.
3. Set the SERVE/SANITIZE SWITCH to
SANITIZE.
4. Pull and hold a dispense handle, then turn associated water
valve adjustment screw until the desired level in the mixing
chamber is achieved.
Turn COUNTERCLOCKWISE to increase flow
Turn CLOCKWISE to decrease flow.
5. Pull individual dispense handles several times to verify new
flow settings.
6. Replace rear panel. Set SERVE/SANITIZE SWITCH to
SERVE
, then reinstall product canisters.
Procedure is complete
