Operation
17
MenuSelect
t
Control
MANAGER PROGRAMMING
Entering the Manager Program Mode
1. Press the MAINTENANCE KEY (19). If the conĆ
trol is password protected, the display reads
ENTER CODE
. Use the alpha/numeric keypad
to enter the manager passcode. Press OK to
enter the program mode.
1. Use the arrows to highlight
OVEN SETUP
.
Press OK to select the product.
Programming Auto Start
NOTE: The Auto Start function enables the oven to
turn on at a programmed time of day and
preheat to a programmed temperature.
1. Use the arrows to highlight
AUTO START
.
Press OK to select.
2. Use the arrows to select either ON or OFF.
Press OK to select.
If ON is selected, the display reads
AUTO
START 24 HOUR TIME 00:00
. Use the arrows
to enter the time you would like the oven to beĆ
gin preheating. Press OK to select.
The display reads
AUTO START TEMP XXX
.
Use the arrows to enter the desired preheat
temperature. Press OK to select.
Programming Oven Setup
These menus allow the manager to set up basic
oven functions
1. Use the arrows to highlight
OVEN SETUP
.
Press OK to select.
2. Use the arrows to highlight
MANAGER PROĆ
GRAM
. Press OK to select.
3. Use the arrows to highlight the oven function
you with to change. Press OK to select.
Choose from the following functions:
Recipe Password
- Select YES or NO to enĆ
able password protection on recipe programĆ
ming. If YES is selected the passcode 3124
must be entered to change recipe programĆ
ming.
Temp Unit
- Select either degrees F or C.
Cool Down Temp
- Select the set temperaĆ
ture for the oven to achieve in Cool Down
mode
Temp Disp Rate
- Set the rate, in seconds,
at which the display switches between actual
and setpoint temperature
Input Rsp Time
- Set the length of time alĆ
lowed to input each variable when programĆ
ming recipes before control automatically exĆ
its out
Setback Time
- When not used for a period
of time, the oven temperature will automaticalĆ
ly reduce to conserve energy. This variable
sets the length of time the oven remains at the
idle temperature before being lowered.
Ready Beep
- Select either ON or OFF. This
is the audible alarm that sounds when the
oven has reached the set temperature.
Cook Cool Fan
- Select either YES or NO.
This function allows the control to display
OPEN OVEN DOOR
when you are attempting
to lower the set temperature of the oven.
Restore Manual
- Select either YES or NO.
This variable enables the oven to remember
the last settings used for manual cooking.
4. After editing a function, press OK to save.
5. When all desired functions have been edited,
use the arrows to highlight
EXIT
. Press OK to
exit the manager programming mode.
