Installation
7
Oven Assembly
LEG ATTACHMENT
1. Align the threaded stud on the right front leg
to the bolt āholeā locatedāāā ināā ātheāā bottom ācorner of
the oven. Turn the leg clockwise and tighten to
the nearest full turn.
2. Align the leg plate holes with the bolt holes.
Figure 2
3.
Install the utility box before securing the
right front leg
. Align the holes in the utility box
bracket to the holes in the leg plate. See
Figure 3.
4. Secure the leg and utility box with the two 3/4"
bolts provided.
Utility Box
Figure 3
5. Repeat steps 1, 2 and 4 with the left front leg.
Figure 4
6. Tip the oven up on the newly installed front
legs. ā
7. Repeat āthe above steps for the right rear leg.
Install the retainer bracket before securing
the right rear leg
. Align the holes in the retainĆ
er bracket to the holes in the right leg plate.
See Figure 5.
8. Secure the leg and retainer bracket with the
two 3/4" bolts provided.
Retainer
Bracket
Figure 5
9. Install the left rear leg.
10. Tip the oven onto the feet and place in posiĆ
tion. Level the oven by screwing the adjustĆ
able feet in or out as necessary.
