Installation
9
Oven Assembly
Top Oven
Electric
Cord
Bottom Oven
Electric Cord
Utility
Box
Retainer
Bracket
Figure 8
6. Reattach the right side panels once the electriĆ
cal connections are complete.
Water and Drain
1. Attach the water manifold to the back of the
ovens.
2. Attach the short water hose from the water
manifold to the utility box underneath the
oven.
Short
Hose
Utility
Box
Water
Manifold
Figure 9
3. Attach the supplied elbow assembly to the
oven drain outlet on both units.
4. Attach the supplied drain hose to the top unit.
Cut for proper length into the funnel drain. Use
the remaining piece of hose for the bottom
oven if necessary. See Figure 6 for location of
drain connection on back of ovens.
Cavity Vent Extension
1. Attach the cavity vent extension using the siliĆ
con tubing and two clamps provided.
2. Remove the existing screw and use it to seĆ
cure the top section in the bracket. The tabs
on the bracket will deflect for a secure fit.
Utility Supply Connection
1. Connect incoming power from the ship to the
electrical connection on the utility box underĆ
neath the oven. See Figure 10.
2. Connect the cold water supply from the ship
to the incoming water connection on the utility
box underneath the oven. A 10' water hose is
supplied for your convenience. See Figure 10.
Incoming
Electrical
Supply
Incoming
Water
Supply
Figure 10
