Manual EN
Electronic Circuit Breaker
V 1.0
ECONOMY SMART with IO-LINK
BLOCK Transformatoren-Elektronik GmbH
Max-Planck-Straße 36-46, 27283
.
Verden, Germany
16/2/2019 / Sch
Subject to technical changes
7
2.4
Assembly
The circuit breaker can be assembled on the supporting rail without any tools.
First, rotate the front of the device slightly, in an upward direction, and place it on the pro-
file rail. Note that the device slides downward as far as it will go. Once the device is sitting
on the profile rail, press the underside against the mounting rail until it engages with the
catch on the profile rail (followed by an audible "click"). As a further check, gently shake the
device to ensure it is properly locked in place.
To remove the device, you only need an ordinary tool like a slotted screwdriver. If the at-
tachment is pressed, the device can be released by lifting its underside from the profile rail.
Figure 5: Assembly on the profile rail
