Manual EN
Electronic Circuit Breaker
V 1.0
ECONOMY SMART with IO-LINK
BLOCK Transformatoren-Elektronik GmbH
Max-Planck-Straße 36-46, 27283
.
Verden, Germany
16/2/2019 / Sch
Subject to technical changes
2
1.
General Information
1.1
Safety Instructions
Please read these warnings and safety instructions carefully before operating the device.
The device may only be installed by qualified competent personnel. In the event of malfunc-
tions or damage, switch off the supply voltage immediately and send the device to
BLOCK
Transformatoren-Elektronik GmbH to be checked. The device does not contain any service
components. When an internal fuse is triggered, there is most likely an internal defect in the
device. The data provided are for product description purposes only and should not be con-
strued as legally guaranteed properties.
1.2
Qualified Personnel
The product referred to in this documentation may only be operated by qualified personnel,
in compliance with the specific documentation pertinent to the respective task, in particular
the safety instructions and warnings contained therein. Qualified personnel can, as a result
of their training and experience, help to ensure that the use of the described product meets
all safety requirements as well as applicable regulations, provisions, standards, and laws.
1.3
Intended Use
This device is designed for installation within an enclosure and is suitable for use with gen-
eral electronic devices, such as industrial controls, office equipment, communications
equipment, and gages. Do not use this device in control systems for airplanes, trains, or
nuclear facilities where a malfunction can result in serious injury or death.
1.4
Disclaimer
The contents of this publication have been checked with great care for concordance with the
described hardware and software. Nevertheless, there may be differences between the
product and the documentation. Deviations may also arise due to the further development
of the product.
For this reason, we cannot guarantee full concordance. Should this documentation contain
any errors, we reserve the right to make necessary corrections without prior notice.
