Blaupunkt TravelPilot 100, Operating And Installation Instructions

Page: 21 / 44

Further functions after entering the destination
21
Further functions after entering
the destination
Requirements:
You have entered a destination as described
in the chapter "Destination input"
-or-
You have entered a POI as described in the
chapter "Points of interest"
-or-
You have selected a position in the map as
described in the chapter "Working with the
map", "Tap in the map".
The map is displayed.
Tap on the button Set as Destination to start
the navigation.
-or-
Only available in advanced mode: Tap on the
button Insert Via * to add the location as a
stopover.
Note:
A stopover can only be inserted if you have
previously specifi ed a destination.
-or-
Only available in advance mode: Tap on the
button Place Pin * to start the navigation.
-or-
Tap on the button
More Options * to show
additional buttons.
-or-
Only available in advanced mode: Tap on the
button Routing Methods * in order to indicate
the computed routes on the basis of available
route variants.
Select the route which best suits your needs.
-or-
•
•
•
쏅
쏅
쏅
쏅
쏅
쏅
Only available in advanced mode: Tap on
the button Set as Start * to use the selected
address as the starting point for the route.
-or-
Only available in advanced mode : Tap on the
button
Continue
* to use the selected address
as the last destination of the route.
The old destination remains as a stopover.
-or-
Only available in advanced mode: Tap on the
button Save as POI * to save the selected
address as a POI.
-or-
Only available in advanced mode : Tap on the
button Save as Camera * to save the selected
address as a location where a speed camera
is located.
-or-
Only available in advanced mode: Tap on
the button Add to Favourites * to save the
selected address as a favourite.
Note:
The offer of the functions depends on whether
you have already entered a destination or are
entering a new destination. Buttons which
are available only in the advanced mode are
marked with a star "*".
Saving destinations
There are two lists in which individual destinations
are saved:
In the Favourites
In the list Last Destinations
All destinations in which the route has been started
are automatically stored in the
Last Destinations .
The previous 100 destinations are saved.
Every entered destination and those in the Last
Destinations list can be permanently stored in
the Favourites . That is particular sensible if you
frequently travel to this destination.
쏅
쏅
쏅
쏅
쏅
•
•
TP100EE_lo_GB_ru.indd 21 TP100EE_lo_GB_ru.indd 21 01.09.2008 13:42:05 Uhr 01.09.2008 13:42:05 Uhr