113
Bluetooth® phone call | Sound settings
EN
GLISH
Now you can enter the new PIN:
Enter the number sequence by pressing the
corresponding buttons of the
A
keys.
After entering one digit, the device automatically
switches to the next one. To correct any entry er-
rors, select the corresponding digit by pressing
the rocker switch or
@
again.
After entering the complete new PIN number,
press the
OK
button
:
.
The new entry is stored.
Changing the Bluetooth® name of
the device (RAD NAME)
The
Bluetooth®
name of the device under which it
is displayed by other
Bluetooth®
devices is set to
"BLAUPUNKT BT" at the factory. To change this
name,
open the
Bluetooth®
menu.
Press the rocker switch or
@
until the
"RAD NAME" menu item is selected.
Press the
OK
button
:
to call up the menu
item.
You can now enter a new
Bluetooth®
name:
Enter the name by pressing the correspond-
ing buttons of the
A
keys. Select the
desired letter, if necessary by pressing a
button several times.
After entering one letter, the device automatical-
ly switches to the next one. To correct any entry
errors, select the corresponding digit by press-
ing the rocker switch or
@
again.
After entering the complete name,
press the
OK
button
:
.
The new
Bluetooth®
name is stored.
W
W
W
W
W
W
W
Sound settings
The following sound settings can be changed in
the Audio menu:
Adjusting bass, treble and volume distribu-
tion
Selecting the sound presetting
Changing equalizer settings
Note:
The settings for bass (BASS), middle
(MIDDLE) and treble (TREBLE) are each
stored for the current audio source.
Opening the Audio menu
To call up the Audio menu,
press the
AUDIO
button
<
.
OR:
Press the
MENU
button
9
.
Press the rocker switch
@
until the Audio
menu is displayed.
Adjusting bass, treble and volume
distribution
To perform settings,
in the Audio menu, press the rocker switch
or
@
to select one of these menu
items:
"BASS ": Bass level between -7 and +7
"TREBLE ": Treble between -7 and +7
"BALANCE ": Volume distribution left/right
between -9 and +9
"FADER ": Volume distribution front/rear
between -9 and +9
"X-BASS ": Increasing the bass at low
volume from 0 (off) to 3
The currently active setting is represented by a
bar display.
•
•
•
W
W
W
W
•
•
•
•
•
