Blastrac EBE 350 VH, Operating Instructions Manual, Page: 43 / 99

Operating Instructions EBE 350 VH
Initial operation
Before start-up the operating personnel must be familiar with the
safety regulations given in this manual.
The blast cleaning machine needs to be suspended from a lifting
system such as a mobile crane, dockside crane or system built
lifting beam.
Connect the remote control cable to the socket on the blast
cleaning machine.
Check the main power cable and the dust hose for damage.
Replace or repair all damaged parts before starting the machine.
Connect the blast cleaning machine and the filter unit with the
dust hose. Use hose clamps at the connections.
Connect the supply cable of the blast cleaning machine with the
filter unit. Connect the electric cable of the filter unit with the site
supply (400/480V, 50/60 Hz, 32 A).
5.2 Initial operation
All persons in the proximity of the machine must wear ear
protectors, safety glasses with lateral protection as well as
safety shoes. The operator is obliged to wear close-fitting
protective clothing.
The start of the blast cleaning machine and the filter unit is effected in
the following sequence:
1
Switching on the filter unit
Main switch of the filter unit "ON".
Compressor "ON".
Fan "ON".
Pulsator "ON".
Check the turning direction of the filter and compressor motor.
The correct turning direction is indicated by the arrow on the belt
guard.
4