Blastrac EBE 350 VH, Operating Instructions Manual, Page: 17 / 99

EBE 350 VH Operating Instructions
Safety instructions
2.8 Important safety precautions
Please read these instructions carefully and completely before
operating this equipment.
1. Do not operate this equipment wearing loose fitting clothing in the
vicinity of any moving parts.
2. Keep your hands away from moving parts.
3. Safety goggles and adequate ear protection devices must be worn
by all personnel in the vicinity of the equipment while in operation.
4. Do not operate this equipment on a wet surface or in the vicinity of
any flammable liquid or vapors.
5. Prior to starting this equipment make sure all belts are in good
condition, are in place and adjusted to the proper tension.
6. Do not maintain, repair or climb on this equipment in a suspended
position.
7. Disconnect electrical supply before working on this equipment.
8. Do not stand under suspended machine.
9. No unauthorized person may operate this machine.
Warning
ISPC
Blastrac/EBE machines build for the American market are
special build to run on 440-480V and 60Hz. If the machines are
operating on a Voltage or Hz lower than 440V and 60Hz, it will
damage the electric components.
It is not permitted to make any modifications or changes on the
ISPC Blastrac/EBE blasting equipment without written
permission by ISPC Blastrac/EBE.
11