EBE 350 VH
Operating Instructions
General
3.13 Abrasive sealing
The seal system comprises of four polyurethane seals to ensure that
good sealing is maintained between the blast mouth and the work
surface to be blasted. The seals are fixed in a seal box at the front of
the blast opening of the cabinet and are clamped into place by nuts and
straps.
To obtain access to seal system:
1. Make sure that the power unit is stopped.
2. Unscrew the nuts across the front of the seal box. This will
untighten the straps holding the seals. Pull the seals out of the
seal box.
3. Fit new seals. Retighten the straps with the nuts.
4. Warning:
Do not drop any nut in the blast mouth!
5. Start up & commence work.
Fig. 3.10
1 Inner seal strap top
5
Inner seal right
2 Inner seal top
6
Inner seal strap righ t
3 Inner seal strap left
7
Inner seal strap bottom
4 Inner seal left
8
Inner seal bottom
13
Summary of Contents for EBE 350 VH
