Blastrac EBE 350 VH, Operating Instructions Manual

Page: 32 / 99

EBE 350 VH Operating Instructions
General
3.14 Air suction and filter system
The air streaming through the complete system, created by an exhaust
fan on the dust arrestor, has the following functions:
Cooling of the blast wheels
Cooling of the abrasive
Transport of the abrasive
Transport of dust through the system
Separation of dust from the re-useable abrasive
Transport of dust to the filter unit
Dust arrestor fan:
Motor output
: 2.2 kW
Air throughput : 1200 m³/h
Dust hose:
Length :
30 m
Diameter : 130 mm
All connection points must be sealed carefully and the dust hose
must be fixed with hose clamps!
The filter housing must be sealed properly and all sealings must
be in good condition!
If dust leaves the filter unit instead of clean air, this is a sign that
the filter cartridges are either damaged or not fixed correctly
inside the filter chamber.
The air streams through the machine as follows:
Air is sucked in at the blast head and carries along abrasive and
dust.
15