Page 21
220E JOB SITE MOVEMENT
• Always remove blade and cutting head when machine is being moved or transported
• Cutting head and slide plate can be removed to make the machine more compact.
• NEVER leave machine unattended on an incline.
• Removing added weights help to make the machine easier to move.
TAPING WHEELS
Taping the wheels with a wide like masking tape helps to prevent damage and dirt to floors during move-
in and move-out.
PALLETIZING
Only use a solid platform pallet. If a solid platform pallet is not available, place a piece of ¾" plywood on
top of a pallet. Using a forklift with the forks inserted in the forklift cups, place machine on pallet. Use
ratchet straps to secure machine to pallet.
FRONT WHEEL ASSEMBLY (FIGURE A)
The Front Wheel Assembly is an optional attachment (#220E-5110-100) that is very helpful when moving
the machine around on a job-site or loading the machine that is not on a pallet. It allows machine stability
and safe transportation over any surface. It is easy and quick to attach or detach. Raise slide plate so the
bottom of the slide plate is higher or even with the bottom of the guide channels. Raise cylinder, insert
Front Wheel Assembly into cutting head. Secure with securing pin.
Figure A
WARNING:
Protect others in work area. Provide barriers or shields as needed to protect
others from debris and machine operation. Operator should be aware of who is around them and
their proximity.
Caster
Plate
Note: Make sure the plate is parallel with the floor so the caster
swivels freely.
