manualshive.com logo in svg

Blastrac BMS 220E, Instruction Manual

The Blastrac BMS 220E Instruction Manual is a comprehensive guide that provides step-by-step instructions for operating and maintaining your BMS 220E machine. Easily downloadable and available for free on manualshive.com, this manual ensures smooth operation and optimum performance of your Blastrac BMS 220E for years to come.

Share
Download
background image

Page 30

220E BLADES

Part #

Description

Application

Thickness

#06-135

5" x 16" Blade

Rubber back carpet on wood or concrete floors, excellent for

.062

cleanup and longer durability

#06-147

4" x 6" Blade

Tile or linoleum on concrete floors

.062

#06-148

5" x 6" Blade

Tile or linoleum on wood floors

.062

#06-363-2

3/4'' x 8'' Razor/Scraper Blade (50/pkg)

.032

#06-368-8

7/8'' x 8'' Razor/Scraper Blade (50/pkg)

.045

#06-368-12

7/8'' x 12'' Razor/Scraper Blade (50/pkg)

.045

#06-368-15

7/8'' x 15'' Razor/Scraper Blade (50/pkg)

.045

#06-6258-BU 3" x 12" Self Scoring Blade - Bevel Up

.062

#06-6259-BU 3" x 14" Self Scoring Blade - Bevel Up

.062

#06-6260-BD 3" x 6"  Heavy Duty Ditching

.094

#06-6276-BU 3'' x 10'' Self Scoring Blade

.094

#06-6277-BU 3'' x 12'' Self Scoring Blade

.094

#06-6278-BU 3'' x 14'' Self Scoring Blade

.094

#06-6281

3'' x 8'' Heavy Duty Blade

.094

#06-6282

3'' x 14'' Heavy Duty Blade

.094

#06-6283

3'' x 27'' Heavy Duty Blade

.094

#06-6284

3'' x 12'' Heavy Duty Blade

.094

#06-6285

3'' x 6'' Heavy Duty Blade

.094

#06-6286

3'' x 10'' Heavy Duty Blade

.094

#06-6290

3'' x  6'' Extra Heavy Duty Blade

.187

#06-6291

3'' x 8'' Extra Heavy Duty Blade

.187

#06-6292

3'' x 12'' Extra Heavy Duty Blade

.187

#06-6293

3'' x 14'' Extra Heavy Duty Blade

.187

#06-6294

3'' x 27'' Extra Heavy Duty Blade

.187

#06-7050-200 3'' x 6'' Premium High Tempered Blade

.062

#06-7050-201 3'' x 8'' Premium High Tempered Blade

.062

#06-7050-202 3'' x 10'' Premium High Tempered Blade

.062

#06-7050-203 3'' x 12'' Premium High Tempered Blade

.062

#06-7050-204 3'' x 14'' Premium High Tempered Blade

.062

#06-7050-205 3'' x 27'' Premium High Tempered Blade

.062

#06-7070-2

4'' x 2'' Straight Shank Blades

.500

#06-7070-3

4'' x 3'' Straight Shank Blades

.500

#06-7070-4

4'' x 4'' Straight Shank Blades

.500

#06-7070-6

4'' x 6'' Straight Shank Blades

.500

#06-7071-2

4'' x 2'' Angle Shank Blades

.500

#06-7071-3

4'' x 3'' Angle Shank Blades

.500

#06-7071-4

4'' x 4'' Angle Shank Blades

.500

#06-7071-6

4'' x 6'' Angle Shank Blades

.500

#06-7072-2

4'' x 2'' Straight Shank w/Carbide Tip

.500

#06-7072-3

4'' x 3'' Straight Shank w/Carbide Tip

.500

#06-7072-4

4'' x 4'' Straight Shank w/Carbide Tip

.500

#06-7072-6

4'' x 6''Straight Shank w/Carbide Tip

.500

Razor sharp, super hard for scraping thin epoxies, thin mil coatings
like; urethane paint, poured elastomeric coatings up to 60 mil, hard
to remove adhesive and much more. 

A heavy duty blade that still gives a little flex. Made with Nationals
proven blade hardening process, these blades will stay sharper
longer with better overall performance than any other blade on the
market. Works on Vct, Vat, wood, tile, rubber epoxy, thin-set,
elastomeric coatings, scraping thin-set, glued ceramic.

Extremely hard, high abrasion alloy for tough tear-up situations. Vct,
Vat, wood, tile, thin ceramic, re-scraping thin-set, all carpets, cork,
elastomeric coatings, re-scraping rubber and urethane coatings.
Holds the edge extremely well.

Ultra high quality spring steel is extra hard for long blade life
between sharpening. Works on all glue down carpets, Vct, Vat,
rubber tile, cork, re-scraping adhesive, elastomeric coatings. Great
for floor accumulations.

Works on attached cushion, Unitary or secondary backing, vinyl
backing, soft to medium Pvc, linoleum, carpet tiles, soft cork,
Enhancer and Unibond hot melts.

Works well for ceramic and thick epoxy. Made from an ultra tough
alloy, which is put through special processing to give these blades
unbelievable edge holding ability for ceramic, epoxy, thin-set, mud-
set, decorative concrete toppings and much more.

Works well for ceramic and thick epoxy. The same application as
the #7070 Blades except mounted at an angle to achieve the
optimum shear point for optimum performance.

Works well for ceramic and thick epoxy. The same application as
the #7070, includes the angle like the #7071 and carbide tipped like
the #7072. Works well on elastomeric coatings.

Same application as the .062 blade. The 45° angle, self scoring
wings for easy sharpening. The thickness greatly reduces
breakage, especially on heavily weighted machines.

Summary of Contents for BMS 220E


















































































Reviews:

No comments

Related manuals for BMS 220E

Juniper IMPLEMENTATION SUPPORT - SERVICE DESCRIPTION DOCUMENT 10-2010 Manual preview
IMPLEMENTATION SUPPORT - SERVICE DESCRIPTION DOCUMENT 10-2010
Brand: Juniper Pages: 4
Stratasys Objet WaterJet Site Preparation Manual preview
Objet WaterJet
Brand: Stratasys Pages: 23
Evenheat Glass Operation Manual preview
Glass
Brand: Evenheat Pages: 17
Tunze Comline Wavebox 6208 Instructions For Use Manual preview
Comline Wavebox 6208
Brand: Tunze Pages: 56
Ikegami SKC-131 Operation Manual preview
SKC-131
Brand: Ikegami Pages: 48
Transystem GL-770 Quick Manual preview
GL-770
Brand: Transystem Pages: 2
iDTRONIC ID Lock 1000 Instruction Manual preview
ID Lock 1000
Brand: iDTRONIC Pages: 7
AVL Looms Rug Loom User Manual preview
Rug Loom
Brand: AVL Looms Pages: 118
ASO Safety Solutions ELMON classic 41-312 Operating Manual preview
ELMON classic 41-312
Brand: ASO Safety Solutions Pages: 36
Bacharach MVR-300 UK Installation Manual preview
MVR-300 UK
Brand: Bacharach Pages: 2
unGer RestroomRx Cleaning Procedures preview
RestroomRx
Brand: unGer Pages: 2
Eaton 520 Operating Manual preview
520
Brand: Eaton Pages: 42
Nedap COMBI-BOOSTER Installation Manual preview
COMBI-BOOSTER
Brand: Nedap Pages: 11
Sander XT2000 Instruction Manual preview
XT2000
Brand: Sander Pages: 12
Panasonic CS-MRE7MKE Service Manual preview
CS-MRE7MKE
Brand: Panasonic Pages: 108
Kärcher FR 30 Original Instructions Manual preview
FR 30
Brand: Kärcher Pages: 88
DCC Specialties PSX-AR Manual preview
PSX-AR
Brand: DCC Specialties Pages: 24
Kohler SKYLINE K-706032T-FM-SHP Installation Instructions Manual preview
SKYLINE K-706032T-FM-SHP
Brand: Kohler Pages: 8

Brands by name

Popular brands

Load more brands